New functionalized polyesters to achieve controlled architectures

Following our continued interest in the production of bioerodible and biodegradable functional polymers for biomedical applications, we synthesized and characterized new unsaturated polyesters. The presence of functional groups in the polymer backbone provided sites for chemical modification, and through a variation in the structure, the physical properties, such as the hydrophilicity and solubility, could be affected. With 1,1-di-n-butyl-stanna-2,7-dioxacyclo-4-heptene as the initiator in the ring-opening polymerization of polyesters, a new set of functionalized polyesters was created. The polymerization of ϵ-caprolactone resulted in poly(ϵ-caprolactone) with a double bond incorporated into the structure. The polymers were obtained in a controlled manner with low molecular dispersities. The double bond was previously incorporated into L -lactide polymers, and the two reactions were compared in this study. The conversion of ϵ-caprolactone, with a degree of polymerization of 50, was completed within 140 min, whereas for L -lactide, only a 45% conversion took place in the same period of time. The dispersities were somewhat higher with ϵ-caprolactone because of the higher reaction rate and, therefore, lower selectivity. The incorporated CC double bond in the polyesters provided a variety of opportunities for further modifications. In this case, the double bond of the L -lactide macromonomers was oxidized into epoxides. Epoxidation was carried out with m-chloroperoxybenzoic acid as a chemical reagent. The conversion of the double bonds into epoxides was completed, and the obtained yields were good (>95%). As a result of the mild reaction conditions, the epoxidation of the double bond was carried out quantitatively without any side reactions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 444–452, 2004     

Mechanistic Insights into the Reversible Formation of Iodosylarene–Iron Porphyrin Complexes in the Reactions of Oxoiron(IV) Porphyrin π‐Cation Radicals and Iodoarenes: Equilibrium,Epoxidizing Intermediate,and Oxygen Exchange

We have shown previously that iodosylbenzene–iron(III ) porphyrin intermediates ( 2 ) are generated in the reactions of oxoiron(IV ) porphyrin π‐cation radicals ( 1 ) and iodobenzene (PhI), that 1 and 2 are at equilibrium in the presence of PhI, and that the epoxidation of olefins by 2 affords high yields of epoxide products. In the present work, we report detailed mechanistic studies on the nature of the equilibrium between 1 and 2 in the presence of iodoarenes (ArI), the determination of reactive species responsible for olefin epoxidation when two intermediates (i.e., 1 and 2 ) are present in a reaction solution, and the fast oxygen exchange between 1 and H₂¹⁸O in the presence of ArI. In the first part, we have provided strong evidence that 1 and 2 are indeed at equilibrium and that the equilibrium is controlled by factors such as the electronic nature of iron porphyrins, the electron richness of ArI, and the concentration of ArI. Secondly, we have demonstrated that 1 is the sole active oxidant in olefin epoxidation when 1 and 2 are present concurrently in a reaction solution. Finally, we have shown that the presence of ArI in a reaction solution containing 1 and H₂¹⁸O facilitates the oxygen exchange between the oxo group of 1 and H₂¹⁸O and that the oxygen exchange is markedly influenced by factors such as ArI incubation time, the amounts of ArI and H₂¹⁸O used, and the electronic nature of ArI. The latter results are rationalized by the formation of an undetectable amount of 2 from the reaction of 1 and ArI through equilibrium that leads to a fast oxygen exchange between 2 and H₂¹⁸O.     

介孔材料在烯烃环氧化中的催化应用

本文综述了介孔材料在烯烃环氧化反应中的应用,包括材料的制备方法、催化性能以及活性中心的表征。通过硅钛原子的合理匹配可以达到四配位钛的高度分散,从而提高催化活性。硅烷化处理增加材料表面的疏水性,能够大幅度提高活性和选择性。通过多种谱学和分子模拟等手段可表征骨架钛及其配位情况。     

不同沉淀剂制备的Ag／TS－1催化丙烯直接气相氧化合成环氧丙烷

 在423K、常压固定床石英反应器中，以丙烯直接气相氧化为探针反应，考察了催化剂制备方法、沉淀剂的种类和浓度对制备的Ag／TS－1催化剂催化性能的影响，采用TEM，XRD和UV－Vis等表征手段对Ag／TS－1催化剂进行了分析．结果表明，沉积－沉淀法是最佳的催化剂制备方法，但浸渍法也可制得具有环氧丙烷选择性的催化剂．K2CO3是一种良好的沉淀剂．以K2CO3为沉淀剂，硅钛比为64的TS－1为载体制备的Ag／TS－1催化剂上的丙烯转化率为1．72％，环氧丙烷选择性为98．2％．少量单质银的存在有利于环氧丙烷的生成，除银粒子的分散状态外，银粒子与载体TS－1间的相互作用对提高催化剂的选择性具有决定性作用．     

过氧铌杂多配合物位置异构体的合成、表征及催化性能

合成了6种钨硅杂多配合物异构体α、β_i-M₃H₂[SiW₁₁(NbO₂)O₃₉]·H₂O(M=Me₄N⁺(TMA),Bu₄N⁺(TBA),Et₄N⁺(TEA);β_i=β₁,β₂,β₃)。IR光谱、UV光谱、极谱、I^--S₂O₃^2-滴定证明合成的杂多配合物中有NbO₂基存在, ¹⁸³W NMR光谱证明其阴离子具有Keggin结构,催化实验结果表明,合成的化合物对烯烃环氧化反应具有催化活性,且过氧杂多配合物的催化活性高于非过氧杂多配合物,β异构体的催化活性高于α。     

有机金属衍生物α，β-［(RSn)3GeW9O37］7-的合成与性质研究

本文报道了α，β-M₄H₃［(RSn)₃GeW₉O₃₇］·nH₂O(M=Bu₄N⁺, Me₄N⁺; R=Bu, Ph)杂多配合物的合成、表征及催化性能研究、元素分析、红外光谱和紫外光谱、¹H、¹¹⁹Sn和¹⁸³W核磁共振谱、激光飞行时间(TOF)质谱和极谱数据表明，这些新化合物为三取代的Keggin结构，三个(RSn)³⁺属不同的M₃O₁₃单元并且彼此共角相连，标题杂多化合物主要以单体形式存在且对烯烃环氧化反应具有催化活性。     

对环氧化反应具有高催化活性的钛硅介孔分子筛的制备

 使用短链二元羧酸（包括草酸、戊二酸、柠檬酸和酒石酸）为模板剂，采用溶胶－凝胶法合成了具有大比表面积，孔径在3～7nm的钛硅介孔分子筛．EDX和紫外可见漫反射光谱的研究结果表明，所合成的钛硅介孔分子筛中钛的分布均匀，钛物种以孤立态四面体构型为主．本方法所合成的钛硅介孔分子筛对环己烯环氧化反应具有很高的催化活性和选择性．     

Ti-Si复氧化物载体对金催化剂上丙烯环氧化的影响

 以TiCl4和SiCl4为原料,采用水解和非水水解溶胶-凝胶两种方法制备了一系列不同Ti含量的Ti-Si复氧化物载体,继而用沉积-沉淀法制得载金催化剂. 采用X射线衍射、紫外-可见漫反射光谱、 N2吸附和高分辨透射电镜对催化剂进行了表征,并考察了催化剂在氢气和氧气存在下的丙烯气相环氧化催化性能. 研究表明,钛含量在6%～14%范围内时,两种方法制得的Ti-Si复氧化物均为无定形结构,但采用非水水解溶胶-凝胶法制得的载体比表面积较高. 以非水水解溶胶-凝胶法制备的钛含量10%的Ti-Si复氧化物为载体得到的载金催化剂表现出较高的活性和选择性,反应60 min时,丙烯转化率为5.7%, 240 min后降为3.3%, 环氧丙烷的选择性稳定于95%左右. 还考察了非水水解溶胶-凝胶的陈化时间和金沉积-沉淀溶液的pH值等对反应结果的影响.     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

手性奎宁-卟啉锰催化剂的合成及其催化性能

为了寻找催化活性、相转移活性和手性诱导为一体的卟啉配体[1-4],我们把卟啉和手性相转移源连结起来,用奎宁-卟啉化合物作配体[5],考察其锰 配合物为催化剂对烯烃环氧化反应的催化性能。奎宁-卟啉锰 配合物结构式如下:1　实验部分1.1　试剂和仪器苯乙烯和α-甲基苯乙烯在氮气保护下减压蒸馏处理。氧源ＮａＯＣｌ的浓度由碘量法测定。其余试剂均为化学纯,色谱标样环氧苯乙烯和α-甲基环氧苯乙烯按文献[6]方法合成。奎宁-卟啉配体按文献[5]合成。260-50型红外光谱仪,ＫＢｒ压片;ＵＶ-3000型紫外可见光谱仪,溶剂ＤＭＦ;ＭＴ-3型ＣＨＮ元素…